The time required depends on the size of the area that needs to be disinfected. Cleaning and disinfecting a typical hospital room takes approximately 30 to 45 minutes.

Our advance system can reduce overall cleaning and disinfection time by up to 30%. To ensure the disinfectant achieves its stated effectiveness, it is essential to follow the recommended application instructions.

The system provides thorough disinfection within minutes, allowing the area to be returned to service once the required contact time has been met.

Electrostatic disinfection is designed to eliminate harmful microorganisms from targeted surfaces; however, it does not provide a residual protective barrier against future contamination.

Once treated surfaces are re-exposed to people, airborne particles, or environmental contaminants, pathogens may be reintroduced.

For this reason, high-traffic environments such as healthcare facilities, schools, fitness centers, and other shared spaces may require electrostatic disinfection at more frequent intervals to support ongoing infection prevention and environmental hygiene protocols.

The facility may be reentered following application; however, we recommend allowing a minimum of 10 minutes before reentry.

This period enables the disinfectant to remain visibly wet for the required contact time and allows treated surfaces to dry properly, supporting effective pathogen reduction in accordance with the product label and manufacturer’s instructions.

A light residue or temporary haze may remain on certain treated surfaces following application.

This is a normal result of the disinfection process and can typically be minimized through routine cleaning of high-touch areas and frequently used surfaces in accordance with the facility’s established environmental hygiene protocols.

Electrostatic disinfection may be performed safely in areas containing electronic equipment, including laptops, monitors, and keyboards, provided the solution is not applied directly or at close range.

Before service, we recommend securing paper documents and removing or covering any sensitive items that should not be exposed to the disinfectant mist.

The disinfectant solution used in our process may produce a mild, chlorine-like scent during and shortly after application.

When applied in accordance with the manufacturer’s instructions, our electrostatic disinfection solutions are formulated for use in environments containing plants, people, and animals.

The disinfectant may be used on most fabrics and upholstered surfaces; however, a preliminary spot test is performed in an inconspicuous area before full application.

Certain dyes or textile finishes may be sensitive to our disinfectant solutions and could experience discoloration or other cosmetic changes.